Installing overlock machine :

1) Table and table stand:

Be sure to use genuine table and table stand in order to prevent accident that can result in personal injury or death. If it is inevitable to use a table and table stand which are not genuine ones, select the table and table stand which are able to support the machine weight and reaction force during operation.

If casters are fitted to the table stand, be sure to use the casters with a locking mechanism and lock them to secure the machine during the operation, maintenance, inspection and repair in order to prevent accident that can result in personal injury or death.

2) Cable and wiring:

Be sure to prevent an extra force from being applied to the cable during the use in order to prevent electrical shock, earth leakage or fire accident. In addition, if it is necessary to cable near the operating section such as the V belt, be sure to provide a space of 30mm or more between the operating section and the cable while installing overlock machine.

Be sure to avoid starburst connection in order to prevent electrical shock, earth leakage or fire accident. In addition, be sure to remove the connector while holding its connector section.

3) Grounding:

Be sure to have an electrical expert install an appropriate power plug while installing overlock machine in order to prevent accident caused by earth leakage or dielectric strength voltage fault. In addition, be sure to connect the power plug to the grounded outlet without exceptions. You should follow the same practice while installing the coverstitch machine too.

4) Motor:

Be sure to use the specified rated motor in order to prevent accident caused by burnout.
If a commercially available clutch motor is used with the machine, be sure to select one with an entanglement preventive pulley cover in order to protect against being entangled by the V belt.

Before installing overlock machine:

Be sure to make sure that the connectors and cables are free to damage, dropout and looseness before turning the power on in order to prevent accident that can result in personal injury or death.

Never put your hand into the moving sections of the machine in order to prevent accident resulting in personal injury or death.

If the table stand with casters is used, be sure to secure the table stand by locking the casters or with adjusters, if provided, in order to protect against accident caused by abrupt start of the machine.

After installing overlock machine:

Be sure not to put your fingers, hair or clothing close to the moving sections such as the hand-wheel, hand pulley and motor or place something near those sections while the machine is in operation in order to prevent accident caused by entanglement that can result in personal injury or death.

Be sure not to place your fingers near the surround area of the needle or inside the thread take up lever cover when turning the power on or while the machine is in operation in order to prevent accident that can result in personal injury or death.
At CustomBaba we make sure that all our operators are safe. Adhering to strict policies to child labour in india, we do not allow any such activites in our premises. Although we make sure to deliver your ordder of customised t shirts and custom hoodies on time, operator exhaustion for money is not permistted and enough rest, care and precautions are taken care of to eliminate injuries.  As a t shirt manufacturer, we take care of our responsibilities.

The machine runs at a high speed. Never bring your hands near the moving sections such as looper, spreader, needle bar, hook and cloth trimming knife during operation in order to protect your hands against injury. In addition, be sure to turn the power off and check to be sure that the machine completely stops before changing the thread.

Be careful not to allow your fingers or any other parts of your body to be aught between the machine and table when removing the machine from or replacing it on the table in order to prevent accident that can result in injury or death.

Be sure to turn the power off and check to be sure that the machine and motor completely stop before removing the belt cover and V-belt in order to prevent accident caused by abrupt start of the machine or motor.

If a servomotor is used with the machine, the motor does not produce noise while the machine is at rest.
Be sure not to forget to turn the power off in order to prevent accident caused by abrupt start of the motor.

Never use the machine with the cooling opening of the motor power box shielded in order to prevent fire accident by overheat.

I hope you liked this post.
Category: Garment manufacturing.

installing overlock machine

        Related Posts

Comments

comments