Running a garment factory is not easy.
Even with customised garments like customised t shirts and custom hoodies
Delivering orders on time aside, it is very important to run the factory safe and sound with all precautions.
In this topic we would try to understand the operating environment for the factory with respect to the machines:
Be sure to use the machine under the environment which is not affected by strong noise source (electro magnetic waves) such as a high-frequency welder in order to prevent accident caused by malfunction of the machine.
Never operate the machine in any place where the voltage fluctuates by more than “rated voltage +- 10%” in order to prevent accident caused by malfunction of the machine. This is especially true in overlock machine and coverstitch machine.
Be sure to verify that the air driven device such as an air cylinder operates at the specified air pressure before using it in order to prevent accident caused by malfunction of the machine.
To use the machine with safety, be sure to use it under the environment which satisfies the following conditions:
Ambient temperature during operation 5 to 35 degree celsius.
Relative humidity during operation: 35 to 85%.
At Custombaba as a t shirt manufacturer, we really make a point to deliver orders in time for custom t shirts and custom hoodies, for which we have less delivery time as compared to the time required.
Dew condensation can occur if bringing the machine suddenly from a cold environment to a warm one.
So, be sure to turn the power o having waited for a sufficient period of time until there is no sign of water droplet in order to prevent accident caused by breakage or malfunction of the electrical components, bad for the operating environment.
Be sure to stop operation when lightning flashes for the sake of safety and remove the power plug in order to prevent accident caused by breakage or malfunction of the electrical components.
Be sure to stop operation when lightening flashes for the sake of safety and remove the power plug in order to prevent accident caused by breakage or malfunction of the electrical components.
Depending on the radio wave signal condition, the machine may generate noise in the TV or radio. If this occurs, use the TV or radio kept away from the machine.
In order to ensure the operating environment, local laws and regulations in the country where the sewing machine is installed shall be followed.
In the case the noise control is necessary, an ear protector or other protective gear should be worn according to the applicable laws and regulations.
Disposal of products and packages and treatment of used lubrication oil should be carried out properly according to the relevant laws of the country in which the sewing machine is used.
To operate a factory where workers are safe, it is very important to follow all precautions as prescribed by the industry regulations and as advised by the authorised agents of the machinery you use at your workplace.
I wish this post helped you.
Category: Garment manufacturing.
Become the next Fashion Mogul!
We share only high quality posts, that you would not find anywhere on the web.